Friday, March 26, 2010

Drypoint prints with a plastic plate

For today's post I thought I'd take you into my studio to show you what I've been working on lately.

Although I'm a printmaker, I've never really been too fond of pulling an entire edition. It's for this reason that I keep my editions quite small; usually under 12 per image. Besides the wiping of plates, I really find the prepping of intaglio plates to be tedious. I have found various ways to work around my laziness and still be able to print. For example: I use the cut window remnants of my matts for my collographs because they are already bevelled. For my drypoints, I have been known to use tin which is so thin that it doesn't need any bevel at all. My quest to make plate prepping easier continues. One day when I was cleaning around the house I re-looked at some plastic Ikea bin lids and wondered if I could cut some plates out of them. The plastic is quite soft and can easily take the marks of a scribe well. The lids were as thick as my steel plate so I put a 45 degree bevel on the edges with a utility knife. Easy! That's my kind of plate prep.

Below are some photos of the process I used to create a drypoint print with a plastic plate.

This is a plate in progress.  I will finish the print by hand-coloring with watercolor.

I've been really happy with the variety of line and tone I can create with these plates and because I don't create large editions, I'm not concerned with the plate wearing down.

The major drawback to using this softer plastic versus a styrene or metal plate, is that the oil from the ink softens the plate a bit and it becomes hard to wipe the plate clean after a while. To compensate for the fact that I am only able to print three times per plate before having to clean the plate completely, I print 2-3 different plates at the same time. As well, the plastic gives a lot of plate tone which I have been using to my advantage and wiping it much like I would a reductive monotype.

Here are a few pictures of some pieces I have created using the plastic plates. Fun and cheap. You might want to give it a try too. I would love to see what others come up with.


Add to Technorati Favorites


6 comments:

  1. Holy cow! Those are awesome prints from a plastic plate! You're amazing! I'm going to have to try this.

    ReplyDelete
  2. If you do please post them somewhere. I'd love to see what you get.

    ReplyDelete
  3. http://www.flickr.com/photos/knotaway/4034805348/
    Here is my first attempt at using a plexi plate for drypoint.
    I don't have a press, so I am using a converted pasta maker to print...

    ReplyDelete
  4. Joanna,
    That print looks great! I haven't used plexi-glass yet for drypoint. I use it for watercolor monotypes.
    Great idea about using the pasta machine!

    ReplyDelete
  5. Everything I have read about plexi says you are severely limited in the quantity of pulls. It is a pretty hard surface to cut into, though, so maybe they will hold up. I am in the process of moving and once that is done I am going to do some more experimenting!

    ReplyDelete